GET sum.mation, Руководство пользователя

Страница: 8 / 17

Voltage Selection
The operating voltage of your sum.mation is set at the factory and marked
on the rear of the chassis. It can accept from 100-240 volts AC. If you
change locations and need to set it to a new operating voltage, here's
how:
- unplug the unit from its power source
- remove the screws on the top and gently lift off the cover
- in the back to the right, near the AC plug you will find the voltage
switch:
- simply slide it to the nearest appropriate voltage: 115V setting for
anything between 100-120V; and the 230V setting for anything from 220-
240V.
- changing the voltage requires also changing the fuse value:
Fuse Replacement
In the event that the fuse should need to be replaced first unplug the AC
plug; remove the top cover; locate the fuse holder towards the back of the
circuit board near the round power transformer; remove the existing fuse
and replace it with the appropriate value:
115V setting requires a 1 Amp slo-blo fuse
230V setting requires a 0.5 Amp slo-blo fuse
Summing Mode Switch
Please turn your monitors all the way down, and switch off the power to
sum.mation before making any internal changes!! sum.mation is equipped