background image

Maintenance 

 
(Periodic cleaning and maintenance will maximise the air conditioner’s 
functions and keep it running at optimum efficiency)  

 

 

Filter cleaning 

Check once a week 

 

The air filter should be cleaned 
periodically.  The intervals between 
cleaning will depend on the amount of 
airborne dust in the area in which the 
unit is used.  
 
Turn off the power to the machine and 
remove the plug from the socket  

 

The air filter is removed by sliding it 
vertically upwards from out of the back of 
the unit. 

 

Use a vacuum or brush to remove 
fluff/dust from the filter. 

 

                    

 

 

Wash the filter by immersing it gently in 
warm water (about 40°C) with a neutral 
(or mild) detergent.   

 

 

 
 

Rinse the filter and allow to dry.  
  
Replace the filter by sliding it down into 
the back of the unit  

 

 
 

 

Maintenance on the front 

panel and housing 

 

 
Turn off the power to the machine and 
remove the plug from the socket. 
 
Do not use chemicals or solvents for 
cleaning the unit. 

 

 

 

Never sprinkle water onto the machine 
Use a damp cloth for cleaning. You may use 
mild detergent to remove stubborn stains. 

 

                       

 

 
 
 

Storing the Unit 

 

If the appliance will not be used for a long 
time, it is important to pull out the rubber 
plug from the drain port at the lower rear of 
the machine, in order to drain the water. 
 
Keep the unit running on the fan only setting 
for a few hours on a warm and sunny day to 
dry the appliance inside and prevent mould 
from building up in the unit. 
 
Clean the air filter and reinstall it. 
 
Remove the air hose and keep it in a safe 
place. 
  
Cover the unit and store in a dry place. 

 
 
 
 

Содержание GPACU12H















Отзывы: