GESTRA VKP 42, Оригинальная инструкция по установке

Страница: 26 / 32

26
Problem Cause Remedy
The LED is defective. Return the measuring probe to the
manufacturer to get a new one.
The data collector did not
receive the test results. The connection is interrupted
because the permissible range
has been exceeded. Reduce the distance between the data
collector and the Com Box.
Establish a Bluetooth connection
between the Com Box and the data
collector.
Repeat the test.
The data collector did not
receive the test results.
Error "13" is indicated. The equipment is defective or
has a malfunction. Return the Com Box and measuring
probe to the manufacturer for inspection.
If a component is faulty get a new one
from the manufacturer.
It is hard or impossible to press
the sensor tip inwards. The sensor tip is bent. Return the measuring probe to the
manufacturer to get a new one.
The LED on the USB power
cable ("charger") is illuminated
red. A fault occurred during
charging. Detach the USB power cable ("charger")
from the Com Box and the power supply.
Repeat the charging process.
 If faults occur that are not listed above or cannot
be corrected, please contact our Technical
Service or authorized agency in your country.