GESTRA OR 52-7, Руководство по установке

Страница: 23 / 44

23
Push cleaning device
m
Fig. 5 slowly into the mid position in order to simulate a malfunction.
The amber system LED is flashing and the relay contact Alarm 2 opens.
Error code e or e2 is indicated.
Push cleaning device
m
Fig. 5
back to its initial position. The equipment must switch back to normal
operation.
Fucntional test
Start, Operation, Alarm and Functional Test
- continued -
If the alarm limits and 2 are exceeded, the adjusted time delay is activated.
LED Alarm and LED Alarm 2 are flashing. After the time delay has elapsed, LED Alarm and LED
Alarm 2 are permanently illuminated. The relay contacts for Alarm and Alarm 2 open.
Alarm 2 is also indicated when
n
the separator is switched off,
n
the purging valve Clw is opened and
n
if the sensor ORG 2 signals a malfunction.
Depending on the reason that caused Alarm 2, the equipment
status “ppm>limit”, “separator OFF” or “clear water ON”
will be indicated in the measurement window.
Alarm 1 and 2
OIL CONTENT :
ppm
State: ppm > Limit
16
UTC 10:46 2006-12-06