5
Danger
When loosening the level electrode steam or hot water might escape. This presents the
danger of severe scalds to the whole body.
Do NOT remove the level switch unless the boiler pressure is verified to be 0 bar.
The level switch becomes hot during operation.
Risk of severe burns to hands and arms.
Before carrying out installation and maintenance work make sure that the equipment is
cold.
The terminal strip of the level switch is live during operation.
This presents the danger of electric shock!
Always
cut off power supply
to the equipment before mounting, removing or connecting
the equipment and the terminal strips!
Safety note
The equipment must only be installed and commissioned by qualified and competent staff.
Retrofitting and maintenance work must only be performed by qualified staff who - through adequate
training - have achieved a recognised level of competence.
Important notes
The name plate specifies the technical features of the equipment. Do not commission or
operate any item of equipment that does not bear its specific name plate.
Attention
- continued -
