GESTRA NRG 16-41, Оригинальная инструкция по установке

Страница: 23 / 28

23
Basic Settings
– continued –
Factory set default values
The level electrode features the following factory set default values:
n
Baud rate: 250 kB/s
n
Node ID: NRG 1...-41: 007 , NRG 1...-41.1: 004
Attention
n
We recommend that you commission the CAN bus devices with the default factory
setting.
n
Do not use a node ID for more than one piece of equipment in the CAN bus system.
Assigning / changing node ID
If several systems of the same kind are to communicate in one CAN bus network, be sure to assign
one node ID for each individual system component (e. g. controller).
1. Undo and remove screws
8
. Remove housing cover
0
.
2. Set code switch
b
to the required position. Please observe the setting tables on page 22.
3. Mount housing cover
0
and tighten screws
8
.