background image

15

Item

Designation

Torque [Nm]

G

Thermovit regulator 

140

NM

Hexagon bolts/hexagon nuts

45

A

Union nuts

30

All torques are based on room temperature 20°C, threads without lubricant.

*)  Min. order quantity 20 items. For smaller quantities, please contact your specialist retailer.

Spare Parts

Spare parts list

Taking out of Service

Danger

The equipment is under pressure and hot during operation. Risk of injuries and severe 

burns to the entire body.
Only perform installation and maintenance work when the equipment is not under pressure 

(0 bar) and is cold (20 °C).
Before performing installation or maintenance work, isolate the equipment from upstream 

and downstream pressure, and vent it.
Sharp edges on inner parts present a danger of cuts to hands.
Always wear industrial gloves when working on the equipment. 

Attention

  If there is a risk of frost, drain the trap.

Disposal

The equipment must be disposed of in accordance with statutory waste disposal regula-

tions.

Item

Designation

Stock code

C

Packing 9 x 14 x 7 *)

376552

CGJ

Thermovit regulator, set of gaskets

098847

HJ

Strainer, body gasket

375698

J

Body gasket *) 92.7 x 102 x 1, graphite

375699

Содержание BK 15

















Отзывы: