Remote Maintenance by telnet
83
2
key [ “
key value
” ] val [1|2|3|4]
You can specify the WEP key when entering
in hexadecimal.
With a 64-bit WEP, you can use 10 digit hex-
adecimals. With a 128-bit WEP, you can use
26 digit hexadecimals.
Up to four WEP keys can be registered. Spec-
ify the number to be registered with “val”.
When a WEP is specified by key, the WEP
specified by key phrase is overwritten.
To use this function, set the same key
number and WEP key for all ports that trans-
mit data to each other. Put “0x”on the front
of WEP key.
You can omit the numbers with “val”. The
key number is set to 1 when making these
omissions. The default is blank.
keyphrase [ “
phrase
” ] val [1|2|3|4]
You can specify the WEP key when entering
in ASCII.
With a 64-bit WEP, you can use10 digit hex-
adecimals. With a 128-bit WEP, you can use
26 digit hexadecimals.
Up to four WEP keys can be registered. Spec-
ify the number to be registered with “val”.
When a WEP is specified by key phrase, the
WEP specified by key is overwritten.
To use this function, set the same key
number and WEP key for all ports that trans-
mit data to each other.
You can omit the numbers with “val”. The
key number is set to1 when making these
omissions. The default is blank.
encval [1|2|3|4]
You can specify which of the four WEP keys
is used for packet encoding. “1” is set if a
number is not specified.
auth [open|shared]
You can set an authorization mode when us-
ing WEP. The specified value and authorized
mode are as follows:
open: open system authorized (default)
shared: shared key authorized rate
Parameter
Value configured
Содержание 3300D - Aficio SP B/W Laser Printer
Страница 8: ...vi...
Страница 26: ...18...
Страница 134: ...Network Guide GB GB EN USA AE AE D313 6700...