Gestetner 3300D - Aficio SP B/W Laser Printer, Сетевое руководство

Страница: 71 / 134

Remote Maintenance by telnet
63
2
❖
Specifying the number of concurrent connections
msh> diprint con {multi | single}
• The above command specifies the number of concurrent diprint connec-
tions. Specify “multi” for multiple connections or “single” for a single con-
nection.
• The default is “multi”.
dns
Use the “dns” command to configure or display DNS (Domain Name System)
settings.
❖
View settings
The following command displays current DNS settings:
msh> dns
❖
DNS server configuration
The following command enables or disables the IP DNS server address:
msh> dns “number” server “server address”
The following command displays a configuration using the IP address
192.168.15.16 on a DNS 1 server:
msh> dns 1 server 192.168.15.16
• You can register up to three IP DNS server numbers.
• You cannot use “255.255.255.255” as the DNS server address.
❖
Dynamic DNS function setting
msh> dns “interface_name” ddns {on|off}
• You can set the dynamic DNS function “active” or “inactive”.
• {on} means “active” and {off} means “inactive”.
• wlan can be specified only when the IEEE 802.11b interface is installed.
❖
Specifying the record overlap operation
msh> dns overlap {update|add}
• You can specify operations performed when records overlap.
• update
To delete old records and register new records.
• add
To add new records and store the old records.
• When CNAME overlaps, it is always changed, irrespective of settings.
Interface name Interface configured
ether Ethernet interface
wlan IEEE 802.11b interface