background image

3

Index

  1  Safety precautions and warnings .............................................3
 2  Description ...............................................................................5
  3  Before you start using your pressure washer ...........................6
  4  Operating your pressure washer ..............................................7
  5  After using your pressure washer .............................................9 
 6  Maintenance 

...........................................................................10

 7  Trouble shooting .....................................................................12
 8  Further information .................................................................13
 9  Technical data ........................................................................14
 10 Declaration 

.............................................................................14

1  Safety Precautions and Warnings

Before starting 

up your high-
pressure washer 
for the fi rst time, 

this instruction 

manual must be 

read through carefully. Save the 
instructions for later use.

Safety instructions 
marked with this 
symbol must be 
observed to pre-

vent danger to persons.

This symbol is 

used to mark safety 

instructions that 

must be ob-

served to prevent 

damage to the ma-

chine and its performance.

This symbol in-
dicates tips and 
instructions to 

simplify work and to ensure a 
safe operation.

Do not let people who have not 
been trained in the use of a 
high pressure washer nor read 
the instruction manual ope rate 
the machine.

This appliance is not intended 
for use by children or other 
persons without assistance or 
supervision if their physical, 
sensory or mental capabili-
ties prevent them from using it 
safely. Children should be su-
pervised to ensure that they do 
not play with the appliance.

Before starting up your machine 
please check it carefully for any 
defects. If you fi nd any, do not 
start up your machine and con-
tact your Gerni  distributor.

Especially check:

 The insulation of the electric 

cable should be faultless 
and without any cracks. If the 
electric cable is damaged, an 
authorized Gerni di stributor 
should replace it.

WARNING!

  High pressure jets can be 

dangerous. Never direct the 
water jet at persons, pets, 
live electrical equipment or 
the machine itself.

  Never try to clean clothes or 

footwear on yourself or other 
persons.

  Hold the spray lance fi rmly 

with both hands. The spray 
lance is affected by a thrust 
of up to 16.4 N during ope–

ration.

 The operator and anyone in 

the immediate vicinity of the 
site of cleaning should take 
action to protect themselves 
from being struck by debris 
dislodged during operation. 
Wear goggles and protection 
clothes during operation.

  This appliance has been de-

signed for use with cleaning 
agents supplied or recom-
mended by the manufacturer. 
The use of other cleaning 
agents or chemicals may 
adversely affect the safety of 
the appliance.

  Disconnect from electrical 

power supply before carrying 
out user maintenance.

  To ensure the appliance 

Symbols used to mark in-
structions

Содержание Classic 100.2





















Отзывы: