The regulator used with your grill must be CE approved, and complies with EN16129. The hose
connected to the gas cylinder must be CE approved and conform to local codes. The length of
the hose must be suitable for your needs, never exceeding 1.5m (Standart lenght: 1,20m)
Note: the necessity of changing the hose when national conditions require it.
To ensure that the hose is not subjected to twisting after connection.
To disconnect the gas cylinder:
1. Turn the gas grill knob off.
2. Turn the gas cylinder valve off fully (turn clockwise to stop).
3. Detach the regulator assembly from gas cylinder valve by turning the quick coupling nut
counterclockwise.
4. Install the protective cap back gas tank valve.
Very important: Disconnected the gas cylinder when this grill is not in use.
When using the gas grill, move the gas cylinder as far away as possible from the heat source,
placing it to the side of the gas grill.
The gas cylinder used shall not exceed 13kg, with a maximum height including the regulator of
570mm and a maximum diameter including the regulator of 310 mm.
In case of smell of gas, close the gas cylinder valve and test the leakge.
Gas connection
Regulator and Hose requirements:
Gas cylinder requirements:
18
