background image

5

ELECTRICAL SAFETY

• 

Voltage: 

Plug the appliance to a 220-240V, 50Hz, properly earthed power  

  outlet, it must be in good working order. 
• 

Power connection:

 Do not use an adaptor or an extension cord.  

  Plug the power plug directly into a separate power point that cannot be  
  accidentally turned off, and that is easily accessible so you can switch it off  
  if needed.
• 

Power cord:

 Do not kink or damage the power supply cord. Make sure it is  

  behind the appliance so no one can step on or place anything on the power  
  supply cord or against it. A damaged power plug may overheat and cause a fire.
• 

Damaged cord: 

Do not use a cord that shows cracks or damage. Any damage  

  to the cord may cause a short circuit, fire and/or electric shock.  
  Contact our support centre on [email protected] for advice

 Disconnection:

 Never pull the power cord to unplug appliance. Grip the plug and  

  pull straight out from the power point.
• 

Electrical work:

 If the installation of this appliance requires any electrical work,

  make sure it is carried out by an electrician.

To reduce risk of fire, electric shock or injury, always follow these basic precautions and 
accident prevention measures when using this appliance, including the below:

NOTE: 

This appliance should be installed by an authorised technician else warranty  

   

  will be void.

INSTALLATION

• The product is heavy, be careful when moving it. To avoid back or other
  injury, have 2 people lift or mechanical aid when installing. 
• When unboxing, thoroughly inspect the appliance carefully for any  
  damage. If there is any damage, do not install the appliance. Contact our  
  support centre on [email protected] for advice.
•  While installing the appliance make sure that the power cord is not bent  
  or flattened.
•  Make sure to remove all packaging materials such as foams and tapes 
  before installing the appliance.
•  Make sure if the machine is to be placed on carpet that the ventilation openings  
  in the base are not obstructed
•  Install the washing machine on a flat level and stable ground. 

GENERAL SAFETY INSTRUCTIONS (Cont.)

Содержание GFW800AU80





























Отзывы: