German pool SlimTower EFB-P20H, Руководство пользователя

Страница: 6 / 15

P.11 P.10
Remote Control
The ON/OFF button on the Remote Control or Unit will only turn
this product to Standby Mode, but not complete shutdown. Use the
Power Switch on the base of the main unit to completely power off
when product is not in use. If product is not in use for a prolonged
period of time, please unplug the power cord.
Operating Instructions
Caution:
Occasionally, remote control frequencies for various appliances may overlap. To avoid this issue, please
make sure Remote Control is not within range of other appliances (and vice versa), as:
1. This product may react when using a remote device for other appliances.
2. When using the Remote Control of this product, other electrical appliances may react.
Operating Instructions
Heating Mode Instructions
1. Press the Warm Mode button and the display shows the ambient temperature;
2.
Press Temperature button to set the temperature, and the display will flash digitally, which can be
set to 1-30 °C;
3. 10 seconds after the desired temperature is set, the flashing will stop;
4. Set temperature should be higher than the ambient temperature, so that the Heating function will
turn on;
5. When the ambient temperature reaches the set temperature, the Heating function will stop and
turn into a cool breeze;
6. When the ambient temperature is lower than the set temperature, the Heating function will
automatically activate.
Note: The default setting temperature is 25 °C.
In the Warm Mode, when the ambient temperature is below 0 °C, the display only shows 01, Unit does
not display negative temperature values. After the Warm Mode has run over 9 hours, the machine will
automatically stop running. Restart by pressing the ON/OFF button or by using the Remote Control.
Set temperature > ambient temperature: heating function on.
Set temperature ≤ ambient temperature: heating function stops.
Ambient
Temperature
23°C
Set
Temperature
25°C
Caution:
Warm Mode: Please use Remote Control to set temperature, the Body of the product does not support
this operation.