German pool PRO-12S, Руководство пользователя

Страница: 8 / 20

Notice for Operation
P.8
Lid, Measuring Cup, Seal Ring
Insert the measuring cup to the lid by aligning the two taps to the grooves of the lid and twist to lock it at the
bottom position. Then push in the lid to the blender jar to close it. To open, pull up the flap of the lid.
The seal ring is detachable from the lid for easy cleaning.
Other Important Notice
- For safety, the appliance will not start operation until the blender jar is placed on the unit base, which is for safety purpose.
- Insert the measuring cup to the lid (align the arrow on the cup to the symbol on the lid and turn it to
position). Then press down the lid to the blender jar to close. To open, pull up by the flap of the lid.
- Wind part of the power cord underneath the unit base. Prevent rubber foot from stepping on the power cord.
- The motor may overheat and stop operating under prolonged low-speed operation, blending of excessively
viscous food, or when there is insufficient blending liquid. When this occurs, the motor’s temperature monitoring
system activates to stop the motor. Unplug the power plug and allow the blender to cool down for 45 minutes.
Alternatively, put the blender in a well-ventilated place for it to cool down, or use the PULSE function instead.
- During operation, close the lid tightly to avoid scalding due to spraying of hot liquids.
- Keep hands and utensils out of the container while the motor is running to prevent the possibility of severe
personal injury and/or damage.
- When making hot beverage such as soybean milk, hot soup, please check whether the lid is secured tightly to the
jar to prevent it from falling. It is advisable to start the operation from a lower speed setting and then increase
the speed gradually, or use the Pulse Drive mode.
- Please put liquid and soft food before putting in hard food or ice cubes.
- When the operation finishes, please wait until the blade assembly comes to a complete stop before taking up the
blender jar.
- If the blender emits a burnt smell, stop operation immediately. It may be caused by abrasion at the rubber
cushion base due to incorrect assembly.
- When blending thick and sticky food using high speed, please start the operation at low speed. If the turning is
still idle, disconnect the power and stir the blender jar using a rubber stirrer to drive out the air capsule trapped
in the food. Then close the lid and swtich on again to resume operation.
- Do not operate for more than 10 minutes at a time.