目錄
Care & Maintenance
P.10
- Power plug must be disconnected before cleaning and repair.
- Clean surface of the blender jar with soft cloth or sponge. The measuring cup and the seal ring can be
detached for cleaning.
- The blender jar can be rinsed with water.
- The seal ring is detachable from the lid for easy cleaning.
- After cleaning, put the blender jar on the side or upside down to dry*. Do not immerse the whole jar
in water.
- Do not immerse the unit base or power cord into water or other liquids. Clean the unit base by soft cloth.
Model No
PRO-11
Voltage / Frequency
220-240 V ~ 50-60 Hz
Rated Power
1,680 W
Dimensions
(H) 518 mm
(W) 168 mm
(D) 202 mm
Technical Specifications
*
To dry the blender jar in upside down position, please remove the residual water with a dry cloth. Do not position it near the sink or basin to avoid water
spraying to the bottom part of the jar. This may cause rusting of the bearing and thus affect the performance of the blender.
A Friendly Reminder :
To effectively remove dirt on the jar and blades and help them last longer, do the following: add in water
and lemon, close the lid and then press “Pulse ” button for 2 to 3 times. Replace liquid with clean water
and repeat the above step.
操作說明
15
產品結構
使用注意事項
13
17
清潔與保養
保用條款
技術規格
18
18
19
注意事項
12
3 Easy Steps to Wash the Blender Jar
Caution: Do not immerse the blender jar into water
1. Add 1-2 slices of lemon into 750ml water. Select the “Vegetable” Programme.
2. Pour out water. Repeat Step 1.
3. Pour out water, and wipe it dry with a clean cloth. Put the jar sideways and leave it alone to dry naturally.
- Specifications are subject to change without prior notice.
- If there is any inconsistency or ambiguity between the English version and the Chinese version,
the Chinese version shall prevail.
- Refer to www.germanpool.com for the most up-to-date version of the User Manual.
