P.9
P.8
Operating Instructions
Keep warm function
1. Press the on/off/function key three times to select the keep warm function. The warming indicator
flashes, and the display will flash at 50°C to preset the warming temperature. During the flashing,
press the temperature adjustment key to set the warming temperature.
2. The warming temperature setting range is 30°C - 90°C (cycle display). Each press increases by 1°C,
long press the temperature adjustment key to continuously speed up the adjustment.
3. When the desired temperature is set, release the temperature adjustment key and wait until the
display stops flashing, indicating that the kettle has entered the warming mode.
4. The display shows the current water temperature. If the water temperature is lower than the warming
temperature, the kettle will automatically heat until the temperature reaches the warming
temperature. If the water temperature is higher than the warming temperature, the kettle will
automatically heat when the water temperature drops below the warming temperature.
5. During the warming period, you can still adjust the warming temperature by pressing the
temperature adjustment button.
6. During the warming function, the kettle will be intermittently heated to maintain the warming
temperature.
7. After the warming is completed, press the on/off/function button, the kettle will stop warming, beep
and return to standby.
Note:
- Do not use unboiled water for keep warm, as the keep warm function will not boil water.
- The keep warm function can operate for up to 24 hours. Please stop the keep warm manually
according to your personal needs.
- After 24 hours of keep warm, the kettle will automatically stop the warming and return to standby.
- Use the keep warm function to adjust to the appropriate water temperature to prepare different
drinks.
(
Recommended: 70°C baby milk powder, 85°C coffee, 90°C green tea, 100°C flower tea.
）
Care & Maintenance
General cleaning procedure
- Wash immediately after each use.
- Thoroughly clean the inside of the kettle, the spout and the lid with a little neutral
detergent and a non-abrasive sponge.
- The kettle base cannot be rinsed and splashed. Wipe the body and base with a
slightly damp cloth and dry with a dry cloth.
- Please wait until the inside and outside of the kettle are completely dry before
folding.
Descaling
- After using the product for a period of time, the internal heating plate of the kettle may have scale,
that is, some red or grayish spots, which is normal.
- Please remove the scale regularly. It is recommended that the user remove the scale at least once
every half month to two months.
- Pour about 200ml of white vinegar or citric acid into the pot and soak for at least one hour.
- Then pour out white vinegar or citric acid, wipe the hot plate with a damp cloth and wipe off scale
deposits.
- Add 600ml of water, simmer once or twice, then pour off the water (do not drink). Rinse off with water
after cooling.
- If there is too much scale, it can be repeatedly removed. After the descaling is completed, it is
recommended to run once with pure water.
Watch the video clip
