P.7
P.6
Control Panel
Operating Instructions
Temperature Adjustment Keys
Boil Indicator Light
Cook Indicator Light
Keep warm Indicator
Light
On & Off / Function Key
Instructions
Fold and unfold the kettle
Unfold the kettle
1. Hold the kettle base in one hand and the handle ring in one hand.
2. Pull the kettle base down gently and fully open the kettle.
3. Pull the hidden handle on the handle ring outward.
Folding the kettle
1. Place the kettle on a flat surface first.
2. Put the hidden handles on both sides inward and attach them to the handle ring.
3. Press the kettle down from the top until it is pressed down and fully folded.
Initial use
1. When using the kettle for the first time, please make sure that all packing materials have been
removed.
2. Unfold the kettle completely.
3. Thoroughly clean the inside of the kettle, the spout and the lid with a little neutral detergent and a
non-abrasive sponge. Be careful not to wet the power cord connector on the base of the kettle and
the back of the base.
4. Wipe the body and base with a slightly damp cloth and dry with a dry cloth.
5. Allow the kettle and all parts to dry completely before using them.
6. Add water to the 600ml maximum water level and boil and pour it off once or twice (do not drink).
Operating Instructions
Steps for usage
1. Unfold the kettle and open the lid.
2. Fill in the required amount of water and then cover the lid. Do not pour below the minimum water
level of 200ml or exceed the maximum water of 600ml with ingredients already placed).
3. Plug the power cord into the power cord connector on the back of the base before plugging it into the
outlet.
4. When the power is turned on, the kettle will beep and the display will show OFF, indicating that the
kettle has entered standby.
5. In standby mode, press the on/off/function key continuously to select four modes: boiling,
cooking, keep warm and standby, and cycle in this order.
6. If you need to stop the operation during use, press the on/off/function key, the kettle will stop
working, return to the standby state, and the display will show OFF.
7. After use, please make sure that the kettle is turned off and the display shows OFF. Please pull the
power plug out of the socket, then pull the power cord off the kettle before lifting the kettle.
8. To pour water, press and open the lid to prevent the lid from falling out.
9. Allow the kettle to cool completely after use and then clean it.
Boiling function
1. Press the on/off/function key once to select the boiling function. The water indicator light flashes
and the display will flash simultaneously to display the current water temperature. When the
flashing stops, the kettle enters the boiling mode.
2. When the water temperature reaches 100°C, the kettle automatically stops heating, beeps and
returns to standby.
Note:
Do not open the lid during boiling.
Cooking function
1. Press the on/off/function button twice to select the cooking function. The cooking indicator flashes
and the display will flash simultaneously to indicate the current water temperature. When the
flashing stops, the kettle enters the cooking mode.
2. When the water temperature reaches 100°C, the kettle will continue to heat and cook.
3. When cooking is complete, press the on/off/function key to turn off the kettle. The kettle stops
heating and beeps and returns to standby.
Note:
- It is recommended to open the lid when cooking to avoid fading.
- The cooking function can be used to sterilize dishes.
Watch the video clip
