
操作說明
Operating Instructions
P.7
1. Turning on the Heater
The heater is designed with 3 heating settings.
- Turn the rotary switch from to
to activate the lower halogen heating tube.
- Turn the rotary switch from to
to activate the upper halogen heating tube.
- Turn the rotary switch from to
to activate upper and lower halogen
heating tubes simultaneously.
2. Turning off the Heater
- Turn the rotary power switch to and unplug
the heater.
3. Tip-over Switch
- The appliance is designed with a tip-over switch,
which is at the body base. When the appliance is
tilted, the base deviates from ground or the
surface of the ground is not flat, the switch
will pop out and cut off electricity connection for
safety. To bring it back to operation, place the
appliance on a flat surface and push the switch
back to its original position.
1.啟動電暖爐
電暖爐設三種發熱設定。
- 把旋鈕開關從 轉至 ,
啟動下鹵素發熱管。
- 把旋鈕開關從 轉至 ,
啟動上鹵素發熱管。
- 把旋鈕開關從 轉至 ,
同時啟動上下鹵素發熱管。
2.關掉電暖爐
- 把旋鈕開關轉至 ,並拔掉電源插頭
以切斷電源。
3.防傾倒切斷電源開關
- 電暖爐底部設有防傾倒切斷電源開關。
當電暖爐傾側、底部脫離地面或地面不
平坦的情況下,防傾倒切斷電源開關會
彈出,並切斷電源,以保障安全。將電
暖爐擺放平坦的表面上,把防傾倒切斷
電源開關壓回機身內,電暖爐接通電源
便可正常運作。