German pool HTB-248U, Руководство пользователя, Страница: 9 / 32

P.9
Installation
Window Type Installation
Installing the product onto an aluminum window frame (can be used to replace the exhaust fan in the
bathroom)
Front cover size: 254mm*254mm
Window frame size: 219mm*209mm
1. Secure the water proofcasing onto the aluminum window frame with rivets (use silicone sealant to
seal the sides to prevent rain leaking in).
2. After connecting the power cordm embed the main body into the hole with screws.
Main Body
Nail fixed hole Main body fixed screw Front cover
Wall
Aluminum window
Main Body
Front cover
Aluminum window
About 2300 mm
off the ground
Note:
• This product is suitable for window installation.
For wall or ceiling installation, an additional air
outlet fitting needs to be purchased separately.
• For window type installation, the product must
be installed transversely.
WARNING!
Installation and wiring must be done by a qualified electrical engineering contractor.
•Please use the product under rated voltage and rated frequency in accordance with its rating label.
•During installation, the fixed power wiring must be in accordance with local safety regulations.
•When the power supply is insufficient, contact your local electric power supply company.
•Prior to opening the front cover, please make sure that the product is powered off.