German pool HTB-248U, Руководство пользователя, Страница: 12 / 32

P.12
Functions
Ventilation Function
• Press “VENT
”
button, the “VENT ” indication light gets on, air volume will at the “Low
Speed ”. Press the “SPEED ” button to inter-change to the “High Speed ” or “Low Speed
” mode.
• Timer: The default setting is 2 hours, can change the length of the duration by pressing the “+”
or “-” of the “TIMER” button. The time could be set from 1 hour to 24 hours. The remaining time
will be showed on the LED display. The time selection will be recorded in memory when the
machine is off, and will resume in next usage.
• Stop: Press the “STOP ” button or when pre-set time is over, “VENT ” indication light gets
off, the remaining time display will also be off, and the machine stops automatically.
24 Hours Ventilation Function
• Start: Press “24HR VENT. ” button,the “VENT ” indication light gets on, 24 hours
ventilation will run in “Low Speed ” mode. It is not changeable. The default stop will take effect
after 24 hours. Time cannot be changed. The remaining time will be showed on the LED
display.
• Stop: Press the“24HR VENT. ” button once again and the machine will stop automatically
after the operation, “VENT. ” indication light also gets off automatically. “STOP ” button is
invalid during Vent 24HRS function.
• When “24HR VENT. ” function is running, users can press any function keys to perform a
preferred function. After the preferred function is completed, the machine will resume the “24HR
VENT. ” function, from where it left behind. The machine will count the 24 hours from the
original start time including the time spent on inserting the preferred function. When the time is
up for an accumulative total of 24 hours, the machine will stop automatically.
Delay Off Function
MIN
15
• Start: Press “DELAY OFF
MIN
15
” button, “VENT ” indication light turns on, the product turns
on, air outlet vent closes, sucking the indoor air outside, acting like an exhaust fan. Indicating
“Delay Off” function is in operation. After 15 minutes, product will automatically stop. Time is not
adjustable, and not indicated on the LED display.
• This function runs in default “Low Speed” and wind speed is not adjustable.
• Stop: Press “STOP ” button to cancel function; or product automatically stops after default
time is up.
UVC Sterilization Function
• Start: When product is turned on, press “UVC
” button, indication light gets on, UVC
sterilization commences and will automatically stop after 1 hour.
• Stop: When UVC sterilization is in progress, press “UVC ” button, UVC sterilization function
stops, and indication light turns off.
Note:
• During “24HR VENT. ” operation, press any other function button, the machine will shift to
operate the latest selected function. The “Vent 24HRS” will continue to run after the latest selected
function is finished. The timer will accumulate the time spent on other selected functions during the
period, and will stop automatically after 24 hours.
• Functions that can be performed during “24HR VENT. ” operation do not include “Ventilation
Function” and “Delay Ventilation” function.