P.7
操作說明
Operating Instructions
1.Place suitable cooking utensils in the center of the
hotplate and plug in.
2.Press On/Off button and the LED indicator lights
up in “
---
”. If the Menu button is not pressed with
in a minute, the cooker returns to standby mode.
3.Press the Zone button and the LED indicator displays
“[9]”
. The induction cooker enters FlexInduction
mode. The cooker heats at default power level 9.
Press the
“ ”
or
“ ”
button to select desired
heating power between level 9 to 1.
4.Press the Zone button to enter dual hob mode.
The LED displays “99”. When the relevant 9 flashes,
press
“ ”
or
“ ”
to select desired heating
power between level 9 to 1.
5.Press Max button once, the L LED at the top of
the button lights up. L Zone, the left hotplate,
outputs with maximum power.
“ ”
or
“ ”
buttons cannot be operated, R Zone stops heating.
6.Press Max button twice, the R LED at the top of
the button lights up. R Zone, the right hotplate,
outputs with maximum power.
“ ”
or
“ ”
buttons
cannot be operated, L Zone stops heating.
7. Press Max button thrice, the indicator extinguishes.
The cooker enters FlexInduction mode. The cooker
heats in the default power at level 9. Press the
“ ”
or
“ ”
button to select the desired power
between level 9 to 1.
8.Press the Zone button to enter dual hob mode.
The LED displays “99”. When the relevant 9 flashes,
press
“ ”
or
“ ”
to select desired heating power
between level 9 to 1.
注意
高溫表面。
- 電磁爐在使用時其可觸及表面溫度可能會很高。
- 該電磁爐在使用中極易受熱。
Notice
Hot surface.
- The temperature of accessible surfaces may
be high when the appliance is operating.
- This appliance is liable to get hot during use.
1.將適合的炊具放在加熱中心位置，然後將插頭插
入插座。
2.按開/關鍵， LED指示閃爍“---”，1分鐘不選
擇功能，電磁爐自動恢復到待機狀態。
3.按區域鍵，LED顯示“[9]”
，進入全區域模式，
電磁爐將預設在第9檔進行加熱。按“ ”或
“ ”鍵調整火力9到1檔，以獲得適合的加熱火
力。
4.按區域鍵進入雙爐模式，LED上顯示“99”
。相關
的9閃爍時可以按“ ”或“ ”鍵選擇9至1檔，
以獲得適合的加熱火力。
5.按1次最高火力鍵，此時鍵上方L的LED亮起，此
時L區域(左電磁爐)進行最大功率輸出，此狀態
下“ ”及“ ”鍵不可操作，右邊區域停止加熱。
6.按2次最高火力鍵，此時鍵上方R的LED亮起，
此時R區域(右電磁爐)進行最大功率輸出，此
狀 態下“ ”及“ ”鍵不可操作，左邊區域停
止加熱。
7.按3次最高火力鍵指示燈滅，電磁爐全區域控制
模式，電磁爐將預設在第9檔進行加熱。按火力
調整“ ”或“ ”鍵從9到1檔進行調整以獲得
適合的加熱火力。
8.按區域鍵進入雙爐模式，LED上顯示“99”
。相關的
9閃爍時可以按“ ”或“ ”鍵選擇從9至1檔，
以獲得適合的加熱火力。
