P.2
P.3
Exhaust
Successfully
Exhaust
Unsuccessfully
O.K
WRONG
Kitchen Worktop
錯誤
Kitchen Worktop
正確
Induction Cooker
電磁爐
Induction Cooker
順利排氣
櫃檯檯面
無法排氣
電磁爐
櫃檯檯面
安裝說明
Installation Instructions
安裝前注意
Notice
﹣
嵌入式電磁爐周圍不應有任何障礙物阻擋機身，以免影響電磁爐的散熱效能
There should not be any obstacles surrounding the unit
﹣
請確保電源插頭設在方便接插的地方，並必須接上地線
Make sure power plug is accessible after installation. Power outlet must be earthed
1. 安裝時，注意機身底部以下必須預留
不少於250mm高的空間排風。
For ventilation purposes, there should be
no less than 250 mm high empty space
under the unit body.
2. 機身底部進出風口不能設在封閉的空間裡，
必須保持與不同空間的空氣連接，並儘量與
房間裡的空氣保持一定程度的連接。
Air vent under the unit must be well circulated.
Circulation between space under the unit and room
atmosphere should be present.
250 mm
1. 依據參考開孔尺寸
281mm(W) x 481mm(D)
，
在廚櫃檯面開孔。
According to cutout dimensions
281mm(W) x 481mm(D), make a cutout
hole on the cabinet/counter top.
2. 將隨機的耐油橡膠貼於玻璃支架底部的黏
貼處，然後將機身嵌入櫃中。
Attach the supplied rubber tape to the bottom part
of the unit body, and then place unit through the
cutout hole.
3. 插上電源，安裝完畢。
Connect power and cooker is ready to use.
注意：安裝時必須確保後排氣口
高於
檯面
，使之能正常出風（如上圖所示）
Notes: When the induction cooker is installed,
the exhaust outlet must be put ONTO the
kitchen work-top, so that it can exhaust
successfully. Please refer to the above pictures.
安裝程序
Procedures
目錄
Table of Contents
安裝說明
Installation Instructions
03
產品結構
Product Structure
04
操作說明
Operating Instructions
05
鍋具
Cookware
06
安全注意事項
Safety Cautions
07
保養與清潔
Care & Maintenance
08
常見故障及處理
Troubleshooting
09
技術規格
Technical Specifications
10
保用條款
Warranty Terms & Conditions
11
