German pool EFB-W526, Руководство пользователя

Страница: 9 / 24

P.9
Operation Instructions
Key Function
• Press to activate High Wind Mode. LED Display will show ”HH”, and
wind speed jumps to highest level .
• Press again to exit High Wind Mode. Fan resumes the previously set
speed.
• Press to activate Oscillation. Oscillation angle is 80°.
• Press again to stop oscillation.
• Press to activate Plasma Purificator function, Plasma Purification
Indication Light lights up constant.
• Press again to turn off Plasma Purificator function, Plasma Purification
Indication Light turns off.
• Press to turn the product On and Off.
• Press to set Off-Timer from 1-8 hours.
• Each press increases timer by 1 hour. Control Panel shows “1h” – “8h”.
After selecting timer duration, Timer Indicator Light blinks, and count-
down begins. When countdown is completed, the product automatically
turns off.
• To cancel timer, press repeatedly until timer shows “0h”, buzzer
beeps twice, indicating timer has turned off.
High Wind
Oscillation
Plasma
Purification
On/Off
Timer
• Press to increase wind speed; press to decrease wind speed.
• This product is equipped with 9 wind speed levels.
Wind Speed
Note:
The Remote Control should be pointed directly at the Remote Control Signal Receiver on the Display
Panel to maximize remote control reception.
Note:
The following phenomena may occur during operation:
•
This product may respond to the remote control of other devices.
• If you use the remote control of this product, other devices may respond. This is due to overlap-
ping frequencies of the Remote Control. There is no quality problem in the product itself. To avoid
interference, keep the Remote Control away from other electrical devices during operation.