German pool EFB-W526, Руководство пользователя

Страница: 11 / 24

P.11
Cleaning & Maintenance
WARNING!
• Disconnect the product from the power source before cleaning and maintenance.
• DO NOT touch the product or the plug with wet hands to avoid electric shock.
1. When cleaning the product, DO NOT wet or splash water on the product to avoid water entering
inside and causing electric shock, short circuit or malfunction.
2. Use a dry soft cloth to lightly wipe the surface of the product; or use a soft cloth moistened with
diluted mild detergent to clean, then wipe dry with a dry soft cloth.
3. DO NOT let dust build up on or around the air inlet and outlet, as too much dust will reduce the
efficiency of the product or may even cause malfunction. Regularly use a soft brush or vacuum
cleaner to remove any dust accumulated on the air inlet and outlet.
4. DO NOT use banana oil, naphtha, alcohol, kerosene, benzine, abrasive powders, alkaline
cleansers, harsh brush etc. to clean this product, as it may damage the surface or cause
discoloration.
5. After using this product for a long time, dust may accumulate on or around the plug and socket
area, causing the plug to become humid and lead to poor insulation. This may lead to electric
shock, the plug heating up and fire hazard. Therefore, please regularly unplug the plug and wipe
with a dry cloth.
Troubleshooting
Problem Possible Cause
Product is plugged in but
will not operate
Is the plug properly plugged into the socket?
Is the battery dead?
Is the battery inserted correctly?
Is the Remote Control aligned with the Signal Receiver?
Remote Control does not
function
WARNING!
If error remains, please contact German Pool Customer Service & Repair Centre. DO NOT disassemble
product unless by a qualified technician.