P.7
P.6
Product structure
Control Panel
Screw holes
Upper dish rack
Handle
Handle
Upper drawer
Lower drawer
Drawer slide
Lower dish rack
Body
Operation Instructions
Control Panel
Main Body
System Initialization
1. Make sure the appliance is properly installed in place.
2. Close the drawer before connecting it to AC source.
3. When the product is plugged into the socket, it will emit a “click” sound, indicating the power is
on and the product enters standby status.
Note:
If product does not receive command input after 1 minute, it will automatically turn off.
Open / Close Door
Hold the door handle to horizontally pull out or push in the door. DO NOT use brute force.
Tableware Arrangement
Vertically place the clean and dry tableware on the dish rack. The spacing between the dishes should be
sufficiently wide, otherwise the disinfection and heat drying result will be affected.
Auto Power-off Protection
Upon opening the drawer, the sterilizer enters inactive mode and all functions will be suspended. Only by
closing the drawer will operation resume.
Setting The Clock
1. In standby status, long-press “POWER key ” for 3 seconds, the product will emit a “click”
sound. The hour value will flash.
2. Press “DISINFECT key ” to increase the hour, press “HEAT key ” to decrease. Long-pressing
or will speed up the increase / decrease speed. The clock is displayed in 24-hour mode.
3. After setting the hour, if there is no command input for 3 seconds or if you press “POWER key
” within 3 seconds, product will emit a “click” sound. “Hour” is now set. Press “DISINFECT
key ” to increase the minute, press “HEAT key ” to decrease. Long-pressing or will
speed up the increase / decrease speed.
4. After setting the minute, if there is no command input for 3 seconds or if you press “POWER key
” within 3 seconds, product will emit a “click” sound. The clock is now set.
ICON
KEY
FUNCTION
DISINFECT
Activates Disinfection function or increase timer
HEAT
Activates Heat-Dry function or decrease timer
SMART
Activates Smart function
POWER
Turn power on/off or set timer
.
DISINFECT
HEAT
SMART
POWER
88:88
