P.8
操作說明
Operation Instructions
B. Water Drainage
When the water tank is full, the Tank Full indicator
will light up, the operation will stop automatically.
Empty the water from the water tank when this
happens.
Emptying the Water Tank
B.水箱排水
當水箱水滿時，水滿指示燈會亮起，
並自動停機。此時必須清空水箱中的水。
清空水箱
註：
- 請勿將水箱中的浮子移走，如果水箱的浮
子被移走之後，水滿感應器將無法正常感
應到水位，以致呈現滿水停機狀態。
- 請勿將物品置於水箱中，以致浮子卡住，
否則可能導致水滿時水會從水箱中溢出。
- 如果水箱很髒，只需使用冷水或溫水清洗
即可，不可使用清潔劑、鋼絲絨、化工處
理的除塵布、汽油、苯、稀釋劑或其他溶
劑處理，否則可能會損壞水箱致使其漏水。
- 當放入水箱時，用雙手將水箱按緊，如果
水箱沒有放置好，水滿感應器仍然會被啟
動，抽濕機將無法運轉。
Note:
- Do not remove the float from the water tank.
The water full sensor will no longer be able
to detect the water level correctly without the
float and the unit will stop to operate.
- Do not put any object into the water tank.
This will lead to malfunction of the float and
water leakage when water tank is full.
- If the water tank is dirty, wash it with cold
or lukewarm water. Do not use detergent,
scouring pads, chemically treated dust cloths,
gasoline, benzene, thinner, or other solvents,
as these can scratch and damage the tank
and cause water leakage.
- When replacing the water tank, press the
tank firmly into place with both hands. If the
tank is not positioned properly, the “Tank
Full” sensor will still be activated, and the
dehumidifier will not operate.
1
2
3
由水箱上方之凹槽輕輕拉出
水箱，另一隻手握住左右其
中一側，將水箱取出。
Pull out the water tank by
holding the concave area at
the upper part of the water
tank and pour out the water.
倒轉水箱將水清空。
Discard the collected water.
將水箱放回原位，水滿
指示燈即會熄滅。
Return water tank to its
original position. The Tank
Full indicator will go off.
