3
1. INTRODUCTION
Thank you for selecting the German Physiks PQS 402 for your audio system. It uses an array of two
DDD drivers to cover all frequencies above 220Hz. The low frequencies are handled by a system using
two 10 inch drivers combined with four 8 inch passive radiators. The Loreley is entirely handmade and is
built and tested by highly skilled technicians at our factory in Germany.
Every step in the design and manufacture of this product has been dedicated to producing a loudspeaker
that will provide a lifetime of musical enjoyment.
We strongly recommend that you read this manual before you attempt to use the loudspeakers. The
supplying audio dealer is responsible for assembling and setting up the loudspeakers. This should not
be attempted by the customer. Information on these topics contained in this manual is intended for
general use only.
2. UNPACKING YOUR LOUDSPEAKERS
NOTE:
The customer should not attempt to assemble the loudspeaker.
This will be done by the supplying audio dealer.
The crates and their contents are heavy. To avoid injury, please
ensure that 2 people are available to unpack and position the
loudspeakers.
The PQS-402 is supplied in 3 crates. Before opening them, please inspect them for damage. If you see
any damage to the crates, please contact the supplying audio dealer immediately and provide them with
a full description of the damage. Do not attempt to unpack the loudspeakers until you have spoken with
the dealer and have been advised how to proceed.
The woofer module assemblies for the left and right channels are packed in separate crates which are
marked “left” and “right” on the outside. Take care not to mix components from these two crates up. The
two DDD towers are packed together in the third crate.
Please retain all of the packing as you will need this should it be necessary in the future to ship the
loudspeakers. Should you need to return the loudspeakers to the factory, you must use the original
packing. The use of any other packing may result in the loudspeakers sustaining damage in transit.
Such damage is not covered by the warranty. Should you require replacement packing, please contact
your German Physiks dealer, the national distributor or the factory directly.
Use Figure 1 to identify the major components of the loudspeaker and confirm that the crates contain the
following items:
Item
Quantity
Description
1
2
Bottom Plates
2
2
Lower Modules
3
2
Distance Frames
4
2
Upper Modules
5
2
Top Plates
6
2
DDD towers
7
20
Inter-Cabinet Connecting Cables
8
1
User manual
9
4
Cleaning cloths
If any items are missing, or if any item shows signs of damage, please contact the supplying audio
dealer immediately.
Содержание PQS 402
Страница 18: ...18 ...
