manualshive.com logo in svg

Gerima SMA 30 BPV-25.L1, Руководство по эксплуатации, Страница: 11 / 22

Поделиться
Скачать
Gerima SMA 30 BPV-25.L1 Скачать руководство пользователя страница 11

11

 

©

 

S

M

A

 3

0 

B

P

V

-

25

.L

1 

/ 

01

.0

1.

20

21

 / 

V

01

.0

2

-

EN

 

Basic safety instructions

 

 

Pneumatically

-

driven power tools 

are generally not insulated in a way 

that would allow them to come into 

contact with an electrical power 

source. 

 

 

• 

All work on the machine

’

s air system must be 

performed only by qualified technicians.

 

 

• 

Pneumatically equipment must be checked re-

gularly.

 

 

• 

Any loose connections must be reattached and 

any damaged air hoses replaced immediately.

 

 

• 

Avoid hazards associated with vibrating pneu-

matic tubing. Check the condition of the tubing, 

tube connectors and tube clamps regularly.

 

 

• 

The machine may only be operated with the prescri-
bed air pressure strength.

 

 

 

 

Machine hazards :

 

 

The machine has been built in accordance with the 

latest engineering standards and generally recog-

nized safety principles.

 

Nevertheless, improper use can result in serious or 

fatal injury to the user and/or third parties or cause 

damage to the machine or other property.

 

 

The machine must only be used:

 

 

• 

For its intended purpose.

 

 

• 

If it is safe and in good repair.

 

 

• 

In compliance with the operating manual and by 

persons who are aware of the safety issues and 

hazards associated with the machine.

 

 

• 

Faults that could affect the safety of the ma-

chine must be remedied immediately. 

 

 

Regular pre

-

start safety precautions

 

 

Perform the following pre

-

start proce-

dures each time you plan to use the 

machine:

 

 

• 

Check and ensure that all of the machine

’

s safety 

and protective equipment is in place and functio-

ning correctly.

 

 

• 

Check the machine for visible signs of damage. 

Any defects or deficiencies identified must be 

remedied immediately or reported to the supervi-

sor. The machine may only be used if it is safe 

and in a state of good repair.

 

 

• 

Check and ensure that only authorized persons 

are within the machine

’

s work area and that no 

other persons can be endangered by switching 

on the machine.

 

 

• 

All objects and other materials that are not nee-

ded for the operation of the machine must be 

removed from the machine

’

s work area. 

 

 

• 

The measures to be taken in an emergency are 

known. 

 

 

 

 

Basic Safety Measures for Normal Operation: 

 

 

• 

The machine may only be started 

from the specified workstation.

 

 

• 

During operation of the machine sa-

fety devices must not be removed or 

rendered inoperable.

 

 

• 

The operator may be present only at the spe-

cified workplace during operation of the machine. 

 

 

• 

The operator must ensure that no unauthorized 

persons are in the working area of the machine.

 

 

• 

After switching off the machine, the operator 

must wait until all moving parts have stopped 

and the lights are off function. 

 

 

 

 

Содержание SMA 30 BPV-25.L1























Отзывы:

Нет отзывов