Gerima SMA 20?P 62, Руководство по эксплуатации, Страница: 28 / 36

28
V62.1.2 . 27.09.10.ENG
1 ‐ 10 mm = 4 ‐ fold
RM 2 = 4 ‐ fold
8. GERIMA spare parts
Standard
Alternative
Accessories: RM 2
DL= large
DS= small
≤ 5 mm = 8 ‐ fold
> 5 mm = 4 ‐ fold
RM 2 = 8 ‐ fold
Milling head MH ‐ 45/R2 ‐ B33.1
Can be combined with a DL ‐ 45/R2 ‐ B33 ‐ 1 guide
bearing and fitted with type M indexable cutting
inserts for milling 45° bevels, or fitted with RM 2
radius ‐ milling inserts for milling 2 mm radii.
45° bevel, large guide bearing DL
Combining the large DL ‐ 45/R3 ‐ B33.1 guide bearing
with type M indexable cutting inserts, enables the
inserts to be indexed a total of eight times if the
bevel widths being machined are ≤ 5 mm, or in ‐
dexed four times if the bevel widths are > 5 mm.
Or
Radius: 2.0 mm
The same DL guide bearing is used with the eight ‐
fold indexable RM 2 radius ‐ milling inserts.
45° bevel, small guide bearing DS
If the small DS ‐ 45/R2 ‐ A43.1 guide bearing is com ‐
bined with type M indexable cutting inserts, the
inserts can be indexed four times if the bevel be ‐
ing machined is between 1 and 10 mm wide.
Or
Radius: 2.0 mm
The same DS guide bearing is chosen when the
RM 2 radius ‐ milling inserts are used for milling
tight contours or smaller diameter drill holes. In
this case the inserts can be indexed a total of four
times.