Gerber P2C™ 1600 Cutters
User’s Manual
General Information
1-12
1.5 FRONT PANEL CONTROLS
In order to get acquainted with your Gerber P2C 1600 cutter, read the
following descriptions of the front panel controls and components.
Figure 1-2 shows the location of the main components.
FIGURE 1-2:
GERBER P2C 1600, FRONT VIEW
1.
Pinch roller lever:
- This lever is used to raise and lower the pinch rollers
during media loading (media loading is discussed in Section 1.8).
2.
Media Drive Sleeves
: - The media drive sleeves move the media only
when the pinch rollers are in the “down” position.
The following table lists the number of media drive sleeves installed on the
Gerber P2C cutter.
Number of sleeves
D1600 SL
Short sleeve
9
Long sleeve
1
3.
Tool Carriage: -
The tool carriage holds the knife holder, the pouncing
tool or the pen.