w
w
w
.g
er
at
h
er
m
.c
o
m
34
Notes and statement of manufacturer – Electromagnetic emissions
The device or system is suitable for use in the electromagnetic environment described below. The purchaser and/or user of the
device or system must ensure that it is used in an electromagnetic environment that conforms to the following description.
Emission test
Compatibility Notes on the electromagnetic environment
HF emissions CISPR 11
Group 1
The device or system uses HF energy only for its
internal functioning. Therefore its HF emissions are
very low, and it is unlikely that they will affect electro-
nic instruments located nearby.
HF emissions CISPR 11
Class B
The device or system is suitable for use in all
facilities, including households and facilities that are
directly connected to the public low-voltage electri-
city supply network that supplies buildings used for
residential purposes.
Overtone emissions IEC 61000-3-2
Class A
Voltage fluctuations / Flicker emissions IEC 61000-3-3
Compatible
a4) Warning regarding installation
The device or system should not be used next to other devices or be stacked with other devices and a warning shall be given that if use
next to or stacking with other devices is unavoidable, the device or system shall not be used for the purpose of verifying normal operation
in the configuration in which it is being used.
a5) Compatibility level
The device meets the insensitivity test level required under IEC 60601.
a6) Advice on electromagnetic compatibility – insensitivity
