User Manual
Ergostik
ERGOSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Page 9
2.2
Setup
Before testing with the Ergostik the double pressure tube and the gas
sample tube must be connected to the front panel and also to the
Ergoflow flow sensor
Important additional information regarding the Blue Cherry
software, calibration, disinfection and testing can be found in
separate user manual. Attention should be paid to this
information.
2.2.1
Connecting the tubes to the front panel
On the front side of the Ergostik device are three connectors for the
connection of the pressure tubes. These connectors are colour coded
to ensure correct connection of the tubes.
Always ensure that all tubes are connected securely. Place the
connector from the hose onto the rear connector and turn in a
clockwise direction to secure each connector,
turning counter clockwise will release each connection.
Flow- connector
Flow+ connector
Gas sample connector
