User Manual
Diffustik
DIFFUSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Page 7
Connect a grounded power supply cable to the AC 230V input (1). Now
connect the bus cable to connector (2) of the analyzer. The gas sample
hose has to be connected to the blue Luer connector of the analyzer (3).
Connect the system only to AC sources which are
connected to a reliable protective earth conductor (3-
pin cable, grounded) and which specifications meet the
details described on the label on the rear of the
housing.
Extension cords must not be used.
On request Geratherm Respiratory provides diagrams,
parts lists, descriptions, setting instructions as well as
other documents, which could help the operator to
setup, maintain and repair the device.
The analyzer needs a warm up time of 15 minutes.
Make sure not to start any test before.
1
2
3
