46
** indicate hot cooking zones after use. The indicator goes off as soon as the
relevant cooking zone has cooled down.
4. Operation
4.1 Setting of the time of the day
When the appliance has been connected to the mains for the first time,
please wait until the display indicates 12:30, an acoustical signal sounds
(beep) and the digital colon: flashes. You must set the current time of
the day before initial use.
The clock has a 24-hours-cycle (i.e. 2 pm is 14:00).
1.
Press + or - to set the hours.
2.
Press
to confirm.
3.
Press + or - to set the minutes.
4.
Press
to confirm. The timer is in stand-by mode now.
If the display does not flash, set the time of the day by pressing + and - for more
than 3 seconds simultaneously.
Switching the appliance on and off
When the timer is in stand-by mode, press
for more than 3
seconds. The timer enters the manual mode and the symbol is
on continuously.
1.
Set the desired function and temperature.
2.
Set the timer function and the appliance is ready to operate.
