Z LED 60 starter set operating Instructions
Revision as of 06.03.2020
(TNR: 33700064 / 33700065)
GERA Leuchten GmbH
4.
Training multiple control units
(1)
Example: Training three control units for three different zone keys . The advantage of this
method is that every control unit can be activated individually. This allows you to adjust
both light colour and brightness to different values for every control unit in a later step.
Zone 1
Zone 2
Zone 3
(2)
Example: Training several control units for
one
zone key
This method allows to adjust both light colour and brightness synchronously for several
control units.
Zone 1
Zone 1
Zone 1
5.
Operator control
Shortly press the ON/OFF button to set all zones to either on or off at once.
Shortly press the zone key on the radio remote control, to select the zone you want to control.
You can also select several zones one after the other in order to control them simultaneously (in
sync).
Hold down the zone key of the radio remote control to set the corresponding zone to either
on or off.
Press the keys on the radio remote control to select the desired emotion setting.
Briefly press the key to change the settings, or hold down the key to change the settings more
quickly.
IMPORTANT! After every training or tuning process, you should wait 30 seconds before training or tuning any other device.
