Z LED 60 starter set operating Instructions
Revision as of 06.03.2020
(TNR: 33700064 / 33700065)
GERA Leuchten GmbH
7. Connecting the Zigbee unit with a Zigbee hub
Note:
This function can only be performed after having reset the units to their factory settings. If you
want to keep using it, you can reconnect the remote control to the control unit after this again.
If it has already been reset, the device will not react when attempting to reset it once more.
This will delete every setting and association with any network.
(1)
Reset the control units to its factory settings (last item).
Press the training button at the control unit 5 times quickly one after the other, or set
the device to off and back to on 5 times quickly one after the other (switching the 230V
mains voltage of the converter).
(2)
Set the Zigbee hub to search mode. To do so, please follow the instructions given for the
corresponding device or app.
(3)
Switch the unit OFF for
3 seconds
(switching the 230V mains voltage of the converter), and
then switch it back to ON, the light will slowly flash
twice
.
If it fails, wait
15 seconds,
then try it again.
(4)
The lighting unit connected will flash
5 times
, and then remain constantly illuminated. The
unit should now appear in the operator interface (app) of the Zigbee hub.
