background image

 

English User Manual

 

ةيبرعلا ةغللاب مدختسملا ليلد

 

 
 
 

 

 

 

 

 

 

 

Important information

 

If  you  give  the  device  a  "not  connected"  Please  make  sure  probes  is  completely 

implanted and connected the cables correctly. 

If the device give you x in the search this x mean tow thing  

1- Could be the cable not connect correctly. 

2- could be the device had detect very salty water  

The difference that appears in the depth of the water (such as 80 > > 154) represents 

the depth underground water. 

If  using  another  battery  charger,  preferably  12  to  15  v  no  more  and  no  less,  that  the 

value of amps (2) and if you use a charger amp more will be the battery faster but will 

have less battery life. 

Probe is then limited to a distance of 5 m between the sensors in case of find of water. 

If the distance between the probe 20 m you have to adjust the distance from the sitting  

If the device give you on the screen few data about the depth  

You have to research in the seam place to have the depth 

If the density of the water from 0% to 50 % that is means the water in small quantity in 

this area / 50 to 60 % = medium quantity / 70 to 80 % = good quantity / 80 to 100 % = 

huge quantity.  

When the device gives you the salty water are salty and when it gives you a fresh 
water with simple percentage salinity , this is the normal situation. All kinds of water 
containing salinity 

For salinity: the percentage of salinity is 10,000 parts per million 

Example

 

(40% means 4000 parts per million and 100% is 10,000 parts per million 
means that the water is salty and invalid) The percentage make the conclusion 
of salinity easy. 

When you see the depth in the results, for example: (110-130 meters) and you re-
experience and the depth appear, for example, (120-160 meters) or (40-170 meters) 
that is mean there is  more than a water channel under the ground (there are  several  
Water channels with  different depths at the same place 

 if you made several experiments in the same place and the depth was similar in all 
the experiments that is mean  there is a water basin and not stream water 
 

 

 

Содержание FARM LIFE










Отзывы: