GeoVision VSV13-A-EN, Руководство пользователя, Страница: 44 / 77

40
4.7.2 Wireless-Client Mode
To use the wireless function, a
GV-Wireless LAN USB Adaptor
is required. Contact your
dealer for the purchase of the adaptor.
Figure 4-22
Network type:
Select the network mode
Ad Hoc
or
Infrastructure
.
Infrastructure:
Via the Access Point to connect to the Internet. This mode further
gives wireless access to the Internet or data sharing under a previously wired
environment.
Ad-Hoc:
A Peer-to-Peer mode. This mode connects to other computer with the
WLAN card, and does not need the Access Point to connect to each other.
Network name (SSID):
The SSID (Service Set Identify) is a unique name that
identifies a particular wireless network. Type SSID of the Wireless LAN group or
Access Point you are going to connect to.
Access Point Survey:
Click this tab to search all the available Access Points
(Infrastructure mode) and wireless stations (AD-Hoc mode) within the range of your
WLAN card.
Authentication Type:
Select one of these network authentication and data encryption:
Disable
,
WEP
,
WPAPSK-TKIP
,
WPAPSK-AES
,
WPA2PSK-TKIP
or
WPA2PSK-AES
.
Disabled:
No authentication is needed within the wireless network.
WEP (Wired Equivalent Privacy):
A type of data encryption. Type up to four WEP
Keys in HEX or ASCII format. Note that if you use HEX format, only digits 0-9 and
letters A-F, a-f are valid.