GeoVision GV-SNVR0400F, Быстрый старт, Страница: 27 / 37

24
D. To remove unwanted hosts, click Back to return to the previous step to unselect them.
To add these hosts to Camera List, click Apply . They are immediately added.
5. You can display live view using any of the following method:

Double-click a host

Drag and drop a host to the live view

Select a host on the Camera List and click
Note:
1. For more ways of adding hosts, see 10.2 Adding Hosts in GV-Edge Recording Manager
User’s Manual .
2. If a router or firewall is installed, ensure the following communication ports required by the
Host Search function are open:

TCP/IP ports 5201 (for searching GV-VMS and 5202 (for searching GV-IP Devices)

Multicast port 5200
3. If antivirus software is installed, the Host Search function may be interfered and will not
detect the available hosts. In this case, turn off the antivirus software and try again.
4. To add GV-VMS hosts, make sure that Mobile Service is enabled ahead to allow remote
access from GV-Edge Recording Manager. (Network button > Mobile Service).