GeoVision GV-POE1611-V2, Руководство пользователя

Страница: 16 / 43

 DHCP Enabled: Click to enable the switch to act as the DHCP Client, and the switch will
try getting the IP Address from the DHCP server.
 Fallback IP address: Manually assign the IP address that the network is using. The
default IP is 192.168.0.250 .
 Fallback Subnet Mask: Assign the subnet mask to the IP address. The default IP is
255.255.255.0 .
 Fallback Gateway: Assign the network gateway for industrial switch. The default
gateway is 192.168.0.254 .
 Management VLAN: ID of a configured VLAN (1-4094) through which you can manage
the switch. By default, all ports on the switch are members of VLAN 1. However, if the
management VLAN is changed, the management station must be attached to a port
belonging to this VLAN.
 Name: Type in the new user name. The default value is admin .
 Password: Type in the new password. The default value is admin .
 Inactivity Timeout (secs): Specify the period for the system to time out and display the
login page when there is no activity.
Click Apply to have the configuration take effect. Click Refresh to reset the configuration.
Note: After changed to DHCP mode, the switch must be restarted to get a new IP address.
However, since the switch only provides Web management, it is hard for users to find its
new IP. Do not try this mode without pre-configured DHCP setting in DHCP Server.
12