5. Hardware Installation
5.1. Wiring the DC Power Inputs
Before installing the power input, be sure the DC Power Supply is compliance with
standard power supply certification. The suggested power output voltage you can
choose for the IEEE 802.3af compliant PD is 45 ~ 57 V/DC, and 50 ~ 57 V/DC for
the IEEE 802.3at compliant PD.
Wire DC power cable to the connector
1. Insert the positive and negative wires respectively into the V+ and V-
terminal block connector
V+ V-
V+ V-
Figure 5-1
2. Tighten the wire-clamp screws to prevent the DC wires from being loosened.
Figure 5-1-1
Note
:
The wire range of electric wire is 12 to 24 AWG.
8
