STP Port Settings
The STP Port Setting page allows you to change the port priority and its path cost. After
STP/RSTP is enabled, the system automatically assigns the port priority and path cost to the
port. Normally, it is necessary to change the parameters, however, you may need to control
the root switch or block port in some condition.
This page allows you to change the STP port setting. Select the port number, type the value of
the Priority and Root Path Cost. Click
"Submit"
to apply the settings.
Figure 12-2
Port No:
The port ID. It cannot be changed. Aggregations mean any configured trunk group.
34
