QoS Setting
10
Port, 802.1p, IP / DS based
The page allows you to enable Port Based, VLAN Tag or IP/DS mode of COS.
Figure
10-2
Class of Service Configuration
Enable High Priority:
After Enabled High Priority, the following enabled Port Based
parameter will become High Priority.
Port Base:
The selected port equipped with High Priority. The non-selected port is
Low priority. A packet received by a high priority port is handled as a high priority
packet.
VLAN Tag:
The switch follows the VLAN tag of the incoming packets to forward
traffic. VLAN Tag priority: high priority -> 4~7 ; low priority -> 0~3
IP/DS:
The switch follows the IP TOS / Diff Serve of the incoming packets to forward
traffic. IPv4 DS and IPv6 TC: high priority -> 10,18,26,34,46,48,56 ; low priority ->
others
29
