May 26, 2011
9
Installing USB Driver
To use the USB function, it is required to install the driver on the PC. Follow these steps to
install the driver:
1. Insert the software CD. It will run automatically and pop up a window.
2. Select
Install or Remove GeoVision GV-Series Driver
, and then click
Install
GeoVision USB Devices Driver
. This dialog box appears.
3. Click
Install
to install the drivers. When the installation is complete, this message will
appear:
Install done!
4. Click
Exit
to close the dialog box.
5. To verify the drivers are installed correctly, go to
Device Manager
. Expanding the
Ports
field, you should see one entry for Prolific USB-to-Serial Bridge.
May 26, 2011
10
Specifications
32-bit
Windows XP / Vista / 7 / Server 2008
OS Supported
64-bit
Windows 7 / Server 2008
Input
4
Input
Input Signal
Dry Contact, Wet Contact 9~30V AC/DC
Relay Output
4
Relay Status
Normal Open
USB Connection
30V DC, 3A
Output
Relay
Capacitance
RS-232 Connection
125 / 250V AC, 3A
30V DC, 3A
RJ-11 to DB9
RJ-11 to USB
Interface
3-Pin Internal USB to Internal USB
I/O Box Mode
Without GV-Video Capture Card
Mode Switch
NET/IO Card Mode
With GV-Video Capture Card
Address
1~4
Communication
RS-485, USB, RS-232
Environmental
Condition
0~50 Degree C / 32~122 Degree F
5%~95% (Non-Condensing)
Compatible Model
All GV-Video Capture Card Models
Dimensions (W x H)
99 x 90 mm / 3.90 x 3.54 in
Ordering Information
55-IOCRD-310