May 26, 2011
5
2. You can connect a RJ-11 to USB Cable to the PC's USB Port when a RS-485 device is
connected.
(Allowed for AC/DC Output Voltage)
RJ-11 to USB Cable
4
1
O
N
1
2
O
N
1
O
N
With 2-pin header
PTZ Dome
RS-485+
RS-485-
GV Video Capture Card
Connects to PC's USB Port
3. You can connect a 3-Pin Internal USB Cable to the USB Connectors on the PC's
Motherboard when a RS-485 device is connected.
(Allowed for AC/DC Output
Voltage)
Note:
It is required to install the USB driver. For details, see
Installing USB Driver
later in
the Installation Guide.
Note:
It is required to install the USB driver. For details, see
Installing USB Drive
later in the
Installation Guide.
May 26, 2011
6
Connections In I/O Box Mode
For the connections in the I/O Box Mode, please follow the instructions below:
•
It is not necessary to connect the GV-NET/IO Card to GV-Video Capture Card.
•
Connect the GV-NET/IO Card to the PC by one of the following three ways.
Three Ways of Connections of GV-NET/IO Card and PC:
1. You can connect a RJ-11 to DB9 Cable to the PC's COM Port.
(Allowed for AC/DC
Output Voltage)
2. You can connect a RJ-11 to USB Cable to the PC's USB Port.
(Allowed for DC Output
Voltage only)
Note:
It is required to install the USB driver. For details, see
Installing USB Driver
later in the
Installation Guide.