GV-NET Card V3.0
The GV-NET Card is a RS-485 / RS-232 interface converter that can be installed
inside a PC. It also supports the connection via the USB port.
Installation
Insert the GV-NET card to an empty card slot. Use the 4-pin Mini Power Cable to
connect the GV-NET card to the PC's power supply.
Specification
Interface
RJ-11 to DB9 (RS-232)
Environmental Conditions
0 to 50 degree C , 5%~95% (non-condensing)
2
RJ-11 to DB9 Cable x1
GV-NET Card x1
Packing List
1
RS-485 +
RS-485 -
GV-NET Card
+-
ON
4-pin to 4-pin Mini Power Cable x 1
5
3-pin Internal USB Cable x 1
4
RJ-11 to USB Cable x 1
3
Installation Guide x 1
6
Communication
RS-485 1,200~115,200 bps; USB
RJ-11 to USB
3-pin internal USB to internal USB
RS-485+ / RS-485-
Dimensions
97 (W) x 90 (H) mm
1
Connects to
PC's COM port
or USB port
USB Driver Installation
To use the USB function, it is required to install the driver on the PC. Follow these
steps to install the driver:
(5) To verify the drivers are
installed correctly, go to
Device Manager.
Expanding the Ports field,
you should see one entry
for Profile USB-to-Serial
Bridge.
(1) Insert the software CD. It will run
automatically and pop up a window.
(2) Select
Install or Remove GeoVision
GV-Series Driver
and then click
Install GeoVision USB Devices
Driver
. This dialog box appears.
(3) Click
Install
to install the drivers.
When the installation is complete, this
message will appear:
Install done!
(4) Click
Exit
to close the dialog box.
4-pin to 4-pin
Mini Power Cable
5
Connects to the USB
Connectors on the PC's
motherboard
