Cube Camera
69
5
5.5 Loading Factory Default
5.5.1 Using the Web Interface
You can restore factory default settings through the Web interface. For
details, see
1.5.1 Using the Web Interface.
5.5.2 Directly on the Camera
1. Keep the power and network cables connected to the camera.
2. Use a pin to press and hold the
default
button on the panel.
Status LED
Default button
Figure 5-6
3. R
fault
button when the
status LED
blinks. This shall
urns orange, the process of loading default
elease
the
de
take about 8 seconds.
4. When
the
status LED
t
settings is completed and the camera is ready for use.
