Connecting GV-IR LED T2 to GV-IPCAM
2
3. Fasten the GV-IR LED T2 to the bracket with Round Head Phillips Screws.
GV-IR LED T2
Round Head Phillips Screws
Figure 3
4. Unscrew the power cables of the GV-IPCAM from the supplied 2-pin Terminal Block. Twist
the red wire from the GV-IR LED T2 to the power cable (DC 12 V), which has the gray
stripes on it, and twist the black wire from the GV-IR LED T2 to the power cable (ground),
which has the characters on it.
Figure 4
Note:
Ensure to twist the power cables with the wires of the GV-IR LED in the correct way,
or it may cause the GV-IR LED to burn out.
5