Installing GV-IR LED T2
3
3. Installing GV-IR LED T2
After connecting the GV-IR LED T2 to the GV-IPCAM, you need to access the Web interface
of the GV-IPCAM to install the GV-IR LED T2. Follow the steps below:
1. Access the Web interface of the GV-IPCAM.
Figure 5
2. Select
Video and Motion
, select
Video Settings
, select
Streaming 1
, set
IR Check
Function
from the following options, and then click
Apply
.
Figure 6
Off:
Select this option to leave the GV-IR LED T2 in the ON status continuously.
On:
Select this option to leave the GV-IR LED T2 in the OFF status continuously.
Trigger IR by D/N:
Select this option to trigger the GV-IR LED T2 to turn on in the
Night mode and turn off in the Day mode.
7