15
3. Release the
default
button when the
status LED
blinks. This shall take about 8 seconds.
4. When the
status LED
turns orange, the process of loading default settings is completed
and the camera is ready for use.
Pinhole Camera
1. Keep the PoE cable connected to the main body.
2. Use a pin to press and hold the
Load
default
button on the panel.
Load Default
Status LED
3. Release the
default
button when the
status LED
blinks. This shall take about 8 seconds.
4. When the
status LED
fades, the process of loading default settings is completed and the
camera reboots automatically.
Fisheye Camera
1. Use the supplied torx wrench to remove the camera cover.
2. Use a pointy object such as the tip of a pen to hold down the
Load default
button labeled
below.